Anti Stimulant Fat Burners 35

From ImageWiki

Revision as of 17:49, 30 May 2011 by JacintaPagan4 (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Contour Abs, HCG Diet, Fat Burner 2903.jpg

?

A center console yous a functional accessory for your truck.

The first action to building any custom center console is the style. The console can be a cubby with a hinged lid, or a seat-to-dashboard console by way of audio spokesmans and cup holders. The finish remains a consideration seeing that well. You can make the console using MDF and cover it by means of vinyl fabric, or build it with hardwood veneer. Whatever your design, you need some template to exchange the contour of the floorboard plus transmission hump to the base of the console. Determine on any pattern, compile the materials plus create a custom center console with your truck using woodworking tools.

Difficulty: Moderately Challenging

Directions

Cardboard Use knife Masking tape Felt-tip marker Console materials Table saw Jigsaw Wood glue Finish nail gun or pin-nail gun Finish nails

Template

1 Establish the width, period and height about the console. Make some template via cutting four pieces regarding cardboard to the dimensions of the console using a utility knife. Tape the bits jointly by the corners with masking tape to make a working template.

2 Set the template atop the transmission hump at the floorboard. Mark the contour of the hump on the sides and ends of the template with a felt-tip marker.

3 Lower the marks on the template by means of the utility knife. Location the template on the hump and make revised marks and contour lowers as needed. Mark lines for the top of the console at the sides also ends about the template. Depending on your pattern, the top may be angled or flat. Lower these lines in the use knife.

4 Label the parts and ends of the template for reference. Cut the masking tape by the corners by the use knife. Place the template pieces atop the sheet substance, such as MDF or hardwood veneer.

Fabrication

1 Outline the sides and conclusions of the template bits on the sheet material. Mark each of the bits for reference before cutting.

2 Place upwards the guide on any table saw also lower every piece on its overall square or rectangle. Produce the contour cuts on the pieces with a jigsaw. Examine the fit of the contour cuts on the transmission hump. Mark each and every cuts that need detailing also lower these in the jigsaw.

4 Place the console on the transmission hump. Establish the depth of some raised bottom also mark the within of the console at this depth.

5 Plan the inside of the console every way and reduce the raised bottom for the console. Put in the raised base using wood glue also finish nails, nailing out of the outside of the console into the edges of the raised bottom.

Tips & Cautions

Refer to a web site or custom truck accessory magazines for design and finish suggestions. Attach any lid using self-closing mechanical cabinet hinges. Miter-lower corners of hardwood veneer pieces before assembling the console. Wear safety glasses when cutting materials on a table saw.

References

Tampa Racing: 07 Silverado Stereo Install Massey Aircraft Service: Dr. Dennis Martinez's 67 Chevy Stepside Pickup New Woodwork Plans: Major Woodworking Tools Sandcruiser: Center Console

Photo Credit pickup 4x4 auto from over image from alma_sacra away from website ;

Comments

Personal tools